A notification will pop up at the bottom right side.
It will say "BDX is not plugged in." Click on it and it should update
your BDX.
If that doesn't work, try updating manually:
1. Close all programs (browser, device updater, etc.).
(update
browser script blocking)
2. Disable any anti-virus software if you have enabled
any
3. Unplug the Bully Dog from the OBD2 port and remove
battery for 10 seconds 4. Plug back in
5. Turn car to a run status
6. Open Device Updater
7. A window saying " BDX is not plugged"
should pop up
8. Click on the window and it should update
9. If that doesn't work, unplug the Bully Dog from the
OBD2 port and remove battery for 10 seconds
10. Plug back in
11. Click on the Device Updater icon
12. The popup saying "Cannot connect to BDX"
will appear
13. Close both windows
14. Make sure your "BDX is not plugged....."
window was closed
15. Re-open device updater
16. A new window should pop up saying "A newer
version is available"
17. Click update manually 18.
Follow steps 7 through 15 listed above
If you still can't update your Bully Dog after trying
all of these instructions then chances are something wrong with your device.
Contact Bully Dog regarding the issue.
Comments
Post a Comment